18
EN
Ready to go?
The Landroid
®
is designed for maintaining your grass at a perfect length during the season, but is not designed for deforesting a jungle.
Before it starts mowing for the first time,
1. You should mow your lawn to the desired height.
2. Make sure the operating area is clear from objects such as toys and branches...
Next spring, let your Landroid
®
start mowing early, when the grass is still short, so that you can avoid a preliminary grass cut.
• If your Landroid
®
is
outside its territory,
it will not move and
the LED error light
will be in red and
flashing, and the
machine will beep.
Just move it inside
its territory and
repeat Step 4.
• Landroid
®
turns
on, but the blade
disc does not
move. This is
normal, Landroid
®
needs to recharge,
the blade disc does
not rotate while
it is searching for
the Charging Base
automatically.
• If your Landroid
®
is inside its territory
but the LED error
light is on and in
red, please refer to
“Error Messages”
in Owner’s Manual
for solutions.
•
Your Landroid
®
should always
remain switched
on. If you ever
need to turn it
off, then make
sure you place it
within its boundary
area before you
switching it back
on again.
• Should your
Landroid
®
stop
operating, simply
restart it and
operate it as you
normally would.
NOTE: Please refer to the Owner’s Manual for more information.
Warning
To Next Page
Loading...
