Worx WG401E - Understanding Safety Symbols; Specific Safety for Bagging Attachments

Silent shredder EN
9
8
the cutting means to move.
10) Keep all guards and deflectors in place and
in good working condition.
11) Do not tamper with the power source
governorsettings;thegovernorcontrols
the safe maximum operating speed and
protects the power source and all moving
parts from damage caused by over-speed.
Seek authorized service if a problem exists.
12) Do not transport this machine while the
power source is running.
13) Shut off the power source and disconnect
the plug whenever you leave the work area.
14) Do not tilt the machine while the power
source is running.
4. MAINTENANCE AND STORAGE
1) When the machine is stopped for servicing,
inspection, or storage, or to change an
accessory, shut off the power source,
disconnect form supply, make sure that all
moving parts have come to a complete stop
and, where a key is fitted remove the key.
Allow the machine to cool before making
any inspections, adjustments, etc.
2) When servicing the cutting means be aware
that, even though the power source will
not start due to the interlock feature of the
guard, the cutting means can still be moved
by a manual starting mechanism.
5. ADDITIONAL SAFETY INSTRUCTIONS
FOR UNITS WITH BAGGING
ATTACHMENTS
1) Shut-off the power unit before attaching or
removingthebag;
SYMBOLS
Read the instruction manual,
before use.
Keep bystander or children away.
Danger - Rotating blades. Keep
hands and feet out of openings
while machine is running.
Double insulation
Wear eye and ear protection.
Remove plug from the mains
immediately if the cable is
damaged or cut.
Wait until all machines
components have completely
stopped before touching them.
Do not use as a step
This product has been marked
with a symbol relating to removing
electric and electronic waste. This
means that this product shall not
be discarded with household waste
but that it shall be returned to a
collection system which conforms
to the European Directive 2002/96/
CE. It will then be recycled or
dismantled in order to reduce the
impact on the environment. Electric
and electronic equipment can be
hazardous for the environment
and for human health since they
contain hazardous substances.