Worx WG583E - Page 7

7
l
ess Blower/Vac/Mulcher
W
G583E WG583E.9
Cordless Blower/Vac/Mulcher
WG583E WG583E.X
enables better control of the
power tool in unexpected
situations.
f)Dress properly. Do not
wear loose clothing or
jewellery. Keep your hair,
clothing and gloves away
from moving parts. Loose
clothes, jewellery or long
hair can be caught in moving
parts.
g)If devices are provided
for the connection of dust
extraction and collection
facilities, ensure these are
connected and properly
used. Use of these devices
can reduce dust-related
hazards.
4)Power tool use and care
a)Do not force the power
tool. Use the correct
power tool for your
application. The correct
power tool will do the job
better and safer at the rate
for which it was designed.
b)Do not use the power tool
if the switch does not turn
it on and off. Any power tool
that cannot be controlled
with the switch is dangerous
and must be repaired.
c)Disconnect the plug from
the power source and/
or the battery pack from
the power tool before
making any adjustments,
changing accessories, or
storing power tools. Such
preventive safety measures
reduce the risk of starting the
power tool accidentally.
d)Store idle power tools out
of the reach of children
and do not allow persons
unfamiliar with the power
tool or these instructions
to operate the power tool.
Power tools are dangerous in
the hands of untrained users.
e)Maintain power tools.
Check for misalignment
or binding of moving
parts, breakage of parts
and any other condition
that may affect the
power tool’s operation. If
damaged, have the power
tool repaired before use.
Many accidents are caused
by poorly maintained power
tools.
f)Keep cutting tools sharp
and clean. Properly
maintained cutting tools with
sharp cutting edges are less
likely to bind and are easier to
control.
g)Use the power tool,
accessories and tool bits