11
20V Cordless Bluetooth Speaker EN
Mode 2
Connect the device to the speaker
and connect the speaker to the mains
via AC power transformer.
Turn on the speaker and the speaker
starts to charge the device.
See Fig. D2
Charging the battery pack
Install the battery pack and connect
the speaker to the mains via AC power
transformer to charge the battery
pack.
NOTE: The speaker can charge the
battery pack both when it is on and
off.
NOTE: When the speaker is turned
on, the power indicator blinks and will
become lit when the battery pack is
fully charged. When the speaker is off,
the power indicator blinks slowly and
will get off when the battery pack is
fully charged.
The power indicator blinks quickly
when the battery pack is defective.
See Fig. D3
6.MAINTENANCE
Remove the power supply before carrying out any
servicing or maintenance.
CAUTION: Danger of explosion if battery is
incorrectly replaced. Replace only with the same or
equivalent type.
Never use water or chemical cleaners to clean your
product. Always store your product in a cool and dry
place. Keep all working controls free of dust.
7.TROUBLESHOOTING
1. THE SPEAKER CANNOT BE TURNED ON.
1) Check whether the battery pack is installed
correctly.
2) Check whether the AC power transformer is
correctly plugged to the mains.
3) Check whether the battery pack is out of power.
2. THE SPEAKER CANNOT GET PAIRED WITH
THE AUDIO DEVICE.
1) Check whether the Bluetooth function of the
device is in good situation.
2) Check whether the audio device has been paired
to another Bluetooth device.
3) Check whether there is a device that is causing
interference.
8.ENVIRONMENTAL
PROTECTION
Waste electrical products must not be
disposed of with household waste. Please
recycle where facilities exist. Check with your
local authorities or retailer for recycling advice.
9.DECLARATION OF
CONFORMITY
We,
Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
On behalf of Positec declare that the product
Description 20V Cordless Bluetooth Speaker
Type WX009 WX009.X (009-designation of
machinery, representative of speaker)
Function Playing audio
Complies with the following Directives:
2014/53/EU, 2011/65/EU & (EU)2015/863
Standards conform to
EN IEC 62368-1:2020/A11:2020, EN 62479:2010,
EN 301 489-1 V2.2.3, EN 301 489-17 V3.2.4, EN
55032:2015, EN 55035:2017, EN IEC 61000-3-
2:2019, EN 61000-3-3:2016+A1:2019, EN 300 328
V2.2.2, Final Draft EN 303 345 V1.1.7
The person authorized to compile the technical le,
Name Marcel Filz
Address Positec Germany GmbH
Postfach 32 02 16, 50796 Cologne, Germany
2022/03/01
Allen Ding
Deputy Chief Engineer, Testing & Certication
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China
To Next Page
Loading...