Belt sander EN
76
Waste electrical products should
not be disposed of with household
waste. Please recycle where
facilities exist. Check with your
Local Authority or retailer for
recycling advice.
COMPONENT LIST
1. VARIABLE SPEED CONTROL
2. ONOFF SWITCH
3. SWITCH LOCKON BUTTON
4. HAND GRIP AREAS
5. DUST BAG
6. DUST EXTRACTION OUTLET
7. BELT TENSION RELEASE LEVER
8. ROTATION DIRECTION ARROW
9. BELT CENTERING CONTROL KNOB
10. FRONT HANDLE
11. SANDING BELT See Fig D
12. BASEPLATE (See Fig D
13.
DUST EXTRACTION ADAPTER See Fig F,G
*
Not all the accessories illustrated or described are
included in standard delivery.
TECHNICAL DATA
Type WX661 WX661.X (660-669-designation of ma-
chinery, representative of belt sander)
WX661 WX661.X**
Rated voltage 220-240V~50Hz
Rated power 950W
Rated no load speed 240-350m/min
Belt size 76mmx533mm
Sanding area 76mmx130mm
Protection class
/II
Machine weight (bare tool) 3.3kg
**X=1-999, A-Z, M1-M9 there are only used for different
customers, there are no safe relevant changes between
these models
different from those intended could result in a
hazardous situation.
h) Keep handles and grasping surfaces dry, clean
and free from oil and grease. Slippery handles and
grasping surfaces do not allow for safe handling and
control of the tool in unexpected situations.
5) Service
a) Have your power tool serviced by a qualified
repair person using only identical replacement
parts. This will ensure that the safety of the power
tool is maintained.
SAFETY WARNINGS FOR
SANDER
Hold power tool by insulated gripping surfaces,
because the belt may contact its own cord. Cutting
a “live” wire may make exposed metal parts of the power
tool “live” and could give the operator an electric shock.
SYMBOLS
To reduce the risk of injury, user
must read instruction manual
Double insulation
Warning
Wear ear protection
Wear eye protection
Wear dust mask
Wear protective gloves
To Next Page
Loading...
Need help?
General
