To Next PageTo Next Page
Need help?Do you have a question about the Woson Medical Instrument Co., Ltd TANZO Classic and is the answer not in the manual?
General| Brand | Woson Medical Instrument Co., Ltd |
|---|---|
| Model | TANZO Classic |
| Category | Laboratory Equipment |
| Language | English |
Details standards the sterilizer complies with, including European Directives.
Information about the authorized representative in the European Community.
States manufacturer certifications like EN ISO 9001 and EN ISO 13485.
Specifies that the original document was written in English.
Confirms compliance with Council Directive 93/42/EEC for medical devices.
Provides crucial information and instructions for safe operation and servicing.
Details the types of products and applications suitable for the sterilizer.
States that there are no contraindications for this equipment.
Explains various device and label icons used in the manual for safety.
Lists essential safety precautions and user responsibilities for operating the sterilizer.
Details the safety components of the sterilizer and their functions.
Highlights potential risks like scalding and pollution during operation.
Describes protective devices, like gloves, for safe handling of articles.
Instructions for inspecting the product package upon receipt.
Details the accessories included with the sterilizer and how to unpack them.
Specifies the recommended environmental conditions for sterilizer placement.
Guidance on positioning the sterilizer correctly on a level surface.
Instructions for connecting the sterilizer to a stable and individual power source.
Guidance on completing an inspection checklist after installation.
Identifies and describes the components visible on the front of the sterilizer.
Identifies and describes the components visible on the rear of the sterilizer.
Shows the sterilizer with the door open, highlighting key internal parts.
Provides dimensions for the sterilizer in both closed and opened door states.
Illustrates the loading dimensions for different sterilizer models.
Lists the technical specifications of the sterilizer, including voltage, power, and noise.
Details the specifications for the sterilizer's steam safety valve.
Specifies the volume and requirements for the clean water tank.
Lists the available test methods for the sterilizer's performance.
Explains the function panel, display, buttons, indicators, and water level.
Details menu system, sterilization and test program selection, and time setting.
Illustrates display stages for pre-vacuum sterilization cycles.
Steps for powering on the sterilizer and checking its ready status.
Procedure for adding distilled water to the sterilizer when the water level is low.
Explains the indicator for a full used water reservoir and draining procedure.
Guide on selecting the appropriate sterilization program and temperature.
Instructions on how to properly load articles onto the trays for sterilization.
Provides guidelines for arranging articles on trays to ensure effective sterilization.
Procedure for properly closing the sterilizer door after loading.
Steps to start a sterilization cycle after closing the door.
Information on what happens at the end of a cycle and safe removal of items.
Instructions for safely powering off the sterilizer after use.
How to handle and recover from abnormal program exits or errors.
Procedure for handling situations where the sterilizer loses power during operation.
Key points to ensure for correct and safe operation of the sterilizer.
Lists prohibited actions and conditions to avoid during sterilizer use.
Provides a schedule for daily, weekly, monthly, and yearly maintenance tasks.
Instructions for daily cleaning of the door gasket and chamber.
Specific cleaning instructions for the chamber when sterilizing biological media.
Procedures for weekly cleaning of the chamber, trays, rack, and filter.
Guidance on cleaning or replacing the water draining filter.
Instructions for monthly cleaning of the clean water tank.
Details on changing the door gasket, including step-by-step instructions.
Lists checks performed by a technician during general servicing.
Steps to prepare the sterilizer for transport or storage.
Procedure for draining water from the reservoir and collector.
Specifies temperature, humidity, and pressure conditions for storage.
Requirements for packaging the sterilizer for transport.
Lists error codes, their descriptions, and potential causes.
Diagram illustrating the pipeline connections within the sterilizer.
Diagram showing the electrical connections and components of the sterilizer.
Lists testing items and their corresponding standards for inspection.
Continues listing testing items and standards for inspection.
