CoolSpeed mini spindles are driven by through-coolant or oil.
They provide for very high rotation speeds while maintaining perfect run-out values.
CoolSpeed mini is designed to machine the workpiece top surface and perform milling, drilling, chamfering and
engraving. It requires no machine adaptations, it fits into standard – sealed – tool holders, and several CoolSpeed
mini units may be applied into the machine magazine during the machine set-up.
The CoolSpeed mini spindles provide for significant cost reductions, including:
– Longer tool life
– Shorter machining times
– Longer main spindle life
– Freeing machine to perform other tasks
To Next Page
Loading...
