Need help?Do you have a question about the wtw AmmoLyt Plus 700 IQ and is the answer not in the manual?
General| Category | Accessories |
|---|---|
| Measurement Parameters | Ammonium, Nitrate, Potassium |
| Resolution | 0.01 mg/L |
| Operating Principle | Ion-selective electrode (ISE) |
| Protection Class | IP68 |
| Weight | Approx. 0.4 kg |
| IP Rating | IP68 |
| Ammonium Measuring Range | 0.1 to 1000 mg/L NH4-N |
| Communication | Digital |
| Power Supply | Via IQ SENSOR NET |
| Nitrate Measuring Range | 0.1 to 1000 mg/L NO3-N |
| Potassium Measuring Range | 0.1 to 1000 mg/L K |
| Operating Temperature | 0 to 50°C |
| Storage Temperature | -20 to 60°C |
Guidance on navigating the operating manual and its modular structure.
Details on the physical components and design of the ammonium sensor.
Outlines the intended applications and uses for the ammonium sensor.
Defines the permissible and intended uses of the ammonium sensor.
Covers general safety precautions for operating the sensor and system.
Lists all components included in the sensor set for various measuring requirements.
Specifies the necessary software versions for the IQ SENSOR NET system.
Provides important guidelines for handling the sensor's electrodes to prevent damage.
Steps involved in getting the sensor ready for measurement, including electrode installation.
Overview of the sensor's automatic electrode recognition and general setting principles.
Explains the concept of calibration-free operation and the purpose of matrix adjustment.
Details the process of adjusting sensor values to match reference lab values.
Outlines how to check and calibrate the sensor using standard solutions.
Instructions and considerations for performing measurements with the sensor.
Discusses variables like pH and potassium ions that influence measurement accuracy.
General guidelines and precautions for maintaining the sensor and its components.
Instructions for cleaning the external parts of the sensor and its accessories.
Step-by-step guide on how to safely replace the electrodes in the sensor.
Lists the available replacement electrodes for the sensor.
Lists other accessories such as calibration solutions, protective plugs, and cleaning components.
Guidance on understanding drift voltage readings and their implications for electrode health.
Identifies common error causes and provides solutions for troubleshooting the sensor.
Details the sensor's measuring principle, parameters, and measurement ranges.
Specifies the environmental and operational conditions for using the sensor.
Provides general specifications like dimensions, weight, materials, and instrument safety.
Details the electrical specifications, including nominal voltage and power consumption.
Specific technical details for the VARION®Plus electrodes used with the sensor.
Lists and explains system messages and error codes for the sensor.
Describes the structure and meaning of sensor status information bits.
To Next Page
