Need help?Do you have a question about the wtw TS 606/2-i and is the answer not in the manual?
General| Brand | wtw |
|---|---|
| Model | TS 606/2-i |
| Category | Laboratory Equipment |
| Language | English |
Specifies authorized use of thermostat cabinets for water analysis and warns against unauthorized use.
Details general safety measures for failure-free operation and when to take the instrument out of service.
Instructions for unpacking, checking delivery, and setting up the instrument, including sunlight warnings.
Steps for initial commissioning, including required waiting time before power-on.
Identifies and describes control unit components: switches, display, and sockets.
Instructions on how to switch the thermostat cabinet on and off using the power switch.
Guides on connecting stirring platforms to control unit sockets, including placement and Y-cable use.
Procedure for setting the desired temperature using up/down keys and confirming the adjustment.
Step-by-step example of changing the factory-set desired temperature from 20°C to 25°C.
Explains how operating mode (heating/cooling) is displayed and covers temperature fluctuations.
Provides warnings and instructions for general maintenance, cleaning, defrosting, and transport.
Directs users to another manual for instructions on disposing of packing material and the thermostat cabinet.
Step-by-step test procedure to verify ventilator, cooling, heating, sockets, and control functionality.
Describes accurate sample temperature measurement using a thermometer after an adjustment period.
Lists causes and remedies for control unit issues like no display or no reaction.
Lists causes and remedies for when the actual temperature is too low, including ambient conditions.
Details causes and remedies for when the actual temperature is too high, including consumer load and sunlight.
Lists test certificates, environmental conditions for operation/storage, and applicable guidelines/norms.
Provides specifications for mains power, voltage, frequency, protective class, and internal fuses.
Details specifications for the TR-1 control unit: range, increment, constancy, and display.
Presents dimensions (outer/inner) and weights (gross/net) for various thermostat cabinet models.
Provides examples and actions for service personnel to check cooling unit functionality.
Outlines the step-by-step procedure for replacing the control unit, including disconnections.
To Next Page
