Single click on the switch to turn on the light, then single click
on the switch to cycle through Moon-Low-Med-High-Turbo.
Press and hold to turn off the light.
2. Installation
3. Default outputs selection
Double click on the switch to turn on the light, then press
and hold to go through brightness from Moon to Turbo
continuously, then Turbo to Moon, release to select
brightness in between.
4. Continuous outputs selection
When the light is on, double click on the switch will switch
between Strobe mode and SOS mode, single click to get
back to constant on mode.
5. Flashlight Mode
When the light is on, press and hold to get into instant turbo,
single click to turn it off.
6. Instant Turbo
When the light is off, trible click on W switch to lockout, the
light will blink to indicate. When the light is lockout,
operations on the switch will activate the blue light in switch
to indicate lockout status, except triple click on the switch to
unlock it.
7. Lockout
① Please screw off the tail switch ② Please Insert the battery with
positive pole pointing
Battery
21700
To Next Page
Loading...