The WUBEN TO40R is a multi-functional LED flashlight designed for outdoor activities, offering a high-performance lighting solution with convenient features.
Function Description
The TO40R serves as a versatile light source, capable of emitting up to 1200 lumens. It features multiple output selections, including Eco, Low, Med, High, and Turbo modes, as well as specialized Strobe and SOS functions for emergency situations. The flashlight incorporates a memory function, recalling the last used output level (excluding flashing modes) when turned on. It is powered by a rechargeable 18650 Li-ion battery and includes a built-in Micro-USB charging port for easy recharging. A battery status indicator provides real-time feedback on the remaining power and charging status. The device also includes a lockout function to prevent accidental activation.
Important Technical Specifications
- LED: 1 × CREE XP-L2 LED
- Max Output: 1200 lumens
- Power Source: 1 pcs 18650 Li-ion battery (WUBEN or WUBEN recommended batteries are advised)
- Charging: Built-in Micro-USB charging port (5V/1A), approximately 4 hours for a full charge.
- Max Beam Distance: 220 meters
- Max Intensity: 12108 cd
- Waterproof Rating: IP68 (2 meters underwater for 1 hour)
- Impact Resistance: 1.5 meters
- Dimensions: 130.2mm (L) x 25.4mm (D) | 5.13in × 1in (L x D)
- Weight: 93g/3.28oz (without battery) | 141g/4.97oz (with battery)
Output Levels and Runtime (based on WUBEN 18650 Li-ion battery 2600mAh):
- Turbo: 1200-700LM, 3+105 mins
- High: 600LM, 3.5h
- Med: 200LM, 7h
- Low: 40LM, 56h
- Eco: 8LM, 125h
- Strobe: 1200LM
- SOS: 1200LM
Battery Status Indication (beneath switch):
- Blue light constant on (off after 5s): Battery power 100%~31%
- Red light constant on: Battery power 30%~15%
- Red light flashes: Battery power under 15%
Charging Status Indication (beneath switch):
- Blue light constant on: Battery power 100%
- Blue light flashes: Battery power 31%~99%
- Red light flashes: Battery power less than 30%
- Red and blue light blink alternatively: Abnormal charging detected (e.g., poor contact, battery damage, reverse installation).
Usage Features
- ON/OFF: Single click the power switch.
- Output Selections: When the light is on, single click the switch to cycle through Eco-Low-Med-High-Turbo. The flashlight remembers the last used output level.
- Instant Turbo:
- When off: Press and hold the switch to activate Turbo; release to turn off.
- When on: Press and hold the switch to activate Turbo (constant on); click to turn off.
- Instant Strobe:
- When off: Press and hold the switch to activate Strobe; release to turn off.
- When on: Press and hold the switch to activate Strobe; click to return to the previous output level.
- SOS: When the light is on, press and hold the switch to activate Strobe, then hold for 3 seconds to enter SOS mode; single click to return to the previous output level.
- Lockout and Unlock: When the light is off, press and hold both the power switch and the main switch simultaneously. The main light will blink to indicate lockout. Press and hold both switches again until it blinks again to unlock.
- Installation: Remove the insulation plate before first use.
- Charging: Plug the Micro-USB charging cable into the port. Unplug after charging is complete. Ensure the rubber cap covers the port well after charging to maintain IP68 waterproof level.
Maintenance Features
- O-Ring Replacement: The O-ring may be damaged over time. Replace it promptly to ensure the product's waterproofness. Spare O-rings are included in the package.
- Battery Usage: Always use WUBEN or WUBEN recommended batteries.
- Low Power Indication: When the flashlight indicates low power, charge or replace the battery in time to prevent affecting battery durability.
- Cleaning: Use alcohol and a rag to clean the conductive parts of the flashlight regularly.
- Long-term Storage: If not in use for a long time, remove the battery to prevent leakage or explosion. Store the flashlight in a dry and ventilated place.
- Troubleshooting: A comprehensive FAQ section is provided in the manual to address common issues such as abnormal flash, failure to turn on, or abnormal noise, with suggested causes and solutions. For unresolved issues, contact the local dealer for after-sales service.
Warnings
- Read the user manual carefully before use.
- The product generates heat during operation; handle with caution to avoid harm.
- Do not shine directly into eyes.
- Keep out of reach of children.
- Do not disassemble the light, as this will void the WUBEN warranty.
- Do not throw the product into fire.
- This is not a diving product; avoid prolonged underwater use.
- Ensure batteries have a circuit protection board.
- Ensure the Micro-USB rubber cap is well-covered after charging to maintain the IP68 waterproof level.
Need help?
General
To Next Page
