11
Warranty
For this Würth tool, we provide a warranty in
accordance with statutory/country-specific regula-
tions from the date of purchase (proof of purchase
by invoice or delivery note). Damage that has
occurred will be corrected by replacement or repair.
Damage caused by normal wear, overloading or
improper handling is excluded from the warranty.
Claims can be recognised only when the tool is pre-
sented undisassembled to a Würth branch office or
a Würth field service employee.
Noise/Vibration Information
Measured values determined according to
EN 60 745-2-6.
Typically the A-weighted noise levels of the machine
are: Sound pressure level: 90.4 dB (A); Sound pow-
er level: 97 dB (A).
Wear hearing protection!
The weighted, triaxial acceleration is typically
22 m/s
2
.
Declaration of Conformity
We declare under our sole responsibility that this
product is in conformity with the following standards
or standardization documents: EN 55 014-1,
EN 55 014-2, EN 61 000-3-2, EN 61 000-3-3,
EN 60 745 according to the provisions of the regu-
lations 73/23/EEC, 89/336/EEC, 98/37/EC.
05
Adolf Würth GmbH & Co. KG
P. Zürn R. Bauer
Subject to change without notice
H 26 ACM.book Seite 11 Freitag, 25. November 2005 8:37 08
To Next Page
Loading...
Need help?
General
