Würth LR 5-14
25
Applications
en
3. Move to the top of the slope and press the target button for 1.5 seconds to start the smart targeting
process. The receiver shows SMT, then XSC for X-axis slope catching.
4. The RL 5-14 searches for the receiver until the on-grade position is found. Once the on-grade position is
found, the receiver will flash all three LEDs simultaneously one time and the receiver returns to normal
operation.
5. After this signal the receiver can be moved and used as normal. The sloped axis is in Manual mode and
should be checked from time to time to ensure the RL 5-14 has not moved.
Step Description
To Next Page