Würth LR 5-14 - Applications: Batter Board Monitoring; Batter Board Monitoring Process

Würth LR 5-14
27
Applications
en
3. Move to the top of the slope and press the target button for 5 seconds to start the smart target and lock
process. The receiver will show SMT, then XSL during the X-axis slope lock process.
4. The RL 5-14 searches for the receiver until the on-grade position is found. Once the on-grade position is
found, the receiver will flash all three LEDs simultaneously one time and the receiver returns to normal
operation. The display will show LOC while the receiver is in lock mode.
)
To turn off lock mode on the receiver, hold the power button for 1.5 seconds.
Step Description