Need help?Do you have a question about the WYBOTICS WY450 and is the answer not in the manual?
Always turn off power when cleaner is on shore or out of pool to prevent damage.
Use leakage protection device for power cord; no one in pool while cleaner operates for safety.
Hold by handle, not cable, when placing in/out of pool; exhaust air for proper operation.
Ensure cable is relaxed and filter screen is installed before starting for optimal performance and to prevent damage.
Clean the filter box promptly after each use to maintain cleaner efficiency.
Store cleaner indoors in a cool, ventilated place, away from direct sunlight.
Place power supply control box in shade, uncovered, to prevent overheating damage.
Non-professionals must not disassemble the cleaner or power supply box to avoid danger or damage.
Connect power supply box to pool fixtures with safety ropes to prevent accidents.
Strictly forbidden to use the machine outside its operating conditions; read manual carefully.
Filter screens with different densities can be changed for seasonal cleaning; contact agent.
Ensure swimming pool water PH value is between 7.0-7.2 for optimal operation.
Do not put water treatment chemicals into the machine; manufacturer not liable for damage.
Enter cleaner with bottom facing pool wall, hold handle, let it sink naturally after gas discharge.
Always hold the handle when taking the cleaner out of the pool; do not pull the cable.
Place power supply box to ensure cleaner reaches all corners; keep it at least 3.5 meters from pool edges.
Input 100-240VAC, 50/60Hz; Output DC 28V.
Power supply MAX 200W; machine power 170W.
Cleaner operates for 1, 2, or 3 hours.
Four modes: bottom, wall, whole pool, waterline.
Flow rate is approximately 18m³/h.
Filtration capacity of 180µm (Nylon) + 5µm (HEPA).
Creeping speed is about 13m/min.
Cleaner IPX8, power supply box IP65.
The machine can be operated via a mobile application.
Working environment temperature range is 0~+40°C.
Details on power, cleaning mode, timing, and one-key function buttons and their indicator lights.
Explains meanings of special indicator light combinations for operation, automatic return, and faults.
Covers OTA upgrade progress, sensor calibration, and various fault indications for motors and power supply.
Instructions on how to remove and clean the filter box and HEPA filter screen after use.
Steps to download the 'winnygo' app for Android and iPhone.
Instructions for turning on the machine and connecting it to the app within 20 seconds.
How to view machine parameters, modify settings, and confirm cleaning programs via the app.
Notes on required mobile phone permissions (Bluetooth, location) and OS compatibility for app use.
Lists items included in the package: main machine, power supply, cable, manuals, and certificates.
Details warranty period, what's covered, and common exclusions like misuse or non-manufacturing defects.
States WYBOT's liability for direct or consequential damages is limited.
Clarifies warranty does not apply to second-hand, close-out, or resold products.
General| Product Name | WYBOTICS WY450 |
|---|---|
| Type | Robotic |
| Waterproof Grade | IP68 |
| Pool Type | Above Ground & In-Ground |
| Pool Size | Up to 50 feet |
| Filter Type | Fine Filter |
| Cleaning Coverage | Floor & Wall |
To Next Page
