18Gbps HDMI In-line Signal Re-Clocker with EDID Management
CON-H2-EDID
Quickstart Guide
Copyright © 2019 WyreStorm Technologies | wyrestorm.com
CON-H2-EDID Quickstart Guide | 190530
UK: +44 (0) 1793 230 343 | ROW: 844.280.WYRE (9973)
support@wyrestorm.com
1 of 4
WyreStorm recommends reading through this document in its entirety to become familiar with the product’s features prior to starting the
installation process.
Basic Wiring Diagram
IMPORTANT! Installation Requirements
• Advanced conguration of this product requires the use of the use of the
WyreStorm Management Suite v1.6 or higher conguration tool. Download
the latest version from the product page before continuing with the
installation.
• Visit the product page to download the latest rmware, document version,
additional documentation, and conguration tools.
• Read through the Wiring and Connections section for important wiring
guidelines before creating or choosing premade cables.
• While this product supports CEC for the HDMI outputs, WyreStorm cannot
guarantee compatibility with all forms of CEC communication.
In the Box
1x CON-H2-EDID
1x DC 12V 1A Power Supply (US/UK/EU/AU)
3x 3-Pin Terminal Block
2x Mounting Brackets
1x Quick Start Guide (This Document)
KEY
Passive HDMI
Control
Power
Analog Audio
Digital Audio
Amplifier
CON-H2-EDID
Rear
CON-H2-EDID
Front
Analog Audio
AC
Mains
HDR Source
Short Throw
Projector
Projector Screen
Audio Video
Receiver
To Next Page
General