Wyrestorm EX-SW-0301-H2 - 6 Troubleshooting; Query Firmware Version; Reboot Device; Restore Factory Defaults

© Copyright 2018 WyreStorm Technologies | WyreStorm.com
EX-SW-0301-H2 API | 180619-1616
11 of 13
North America: 844.280.WYRE (9973) | UK/EMEA: +44 (0) 1793 230 343
Email: Support@WyreStorm.com
6. Troubleshooting
Query Firmware Version
GET VER [Target] [Device]<CR><LF>
Response: VER GET [Target] [Prm] [Device]<CR><LF>]
Example: GET VER all tx<CR><LF>
Response:
VER GET MCU 1.2 tx<CR><LF>
VER GET ARM 1.4 tx<CR><LF>
[Device] = tx | rx | all
[Target]=all | MCU | ARM
[Prm] =x.x// according to actual firmware version
Reboot Device
SET RESET [Device]<CR><LF>
Response: RESET SET [Device]<CR><LF>
Example: SET RESET tx<CR><LF>
Response: RESET SET tx<CR><LF>
[Device] = tx | rx | all
Restore Factory Defaults
SET RESET [Device]<CR><LF>
Response: RESET SET [Device]<CR><LF>
Example: SET RESET tx<CR><LF>
Response: RESET SET tx<CR><LF>
[Device] = tx | rx | all