Wyrestorm MX-0606-H2 v2 - EDID Writing and IR Setting Configuration; Writing EDID to Input Ports; IR System Code Adjustment

16
Technical support: support@wyrestorm.com EMEA/ROW: +44 (0) 1793 230 343
 Select an Input port from the same Select Port area, such as input port 3 in this example, and click Write to save the current
,+0+[V[OLZLSLJ[LKPUW\[WVY[>HP[HML^ZLJVUKZMVY[OLWYVJLZZ[VJVTWSL[L
7. Once the writing process is complete, click Save As[VZH]L[OL,+0+HZHIPUÄSL
8. ;V^YP[LWYL]PV\ZS`ZH]LKV\[W\[WVY[,+0+PUIPUMVYTH[JSPJROpenHUKJOVVZL[OLYLSL]HU[IPUÄSLILMVYLZLSLJ[PUNHUInput port
and click Write.
0[PZYLJVTTLUKLK[OPZHJ[PVUPZJHYYPLKV\[PMZWLJPÄJV\[W\[,+0+MYVTWHY[PJ\SHYKPZWSH`KL]PJLZPZMYLX\LU[S`\ZLK
ix. IR Setting
The matrix supports leading third-party control systems and learning remotes. When using these devices to control the matrix, the
Z`Z[LTJVKLT`ULLK[VILJOHUNLKVY[OL09JVTTHUKZTVKPÄLK
Depending on WyreStorm matrix model, the System Code Switch on remote handset can be changed when more than one matrix is
\ZLKPUHJVUÄN\YH[PVU[OH[ZOHYL[OLZHTLSVJH[PVUPMJVU[YVSPZZ\LZHYLL_WLYPLUJLK
7YLZZPUN[OLYLTV[LOHUKZL[System Code Switch button three times in quick succession changes the system code of the remote
from the default system code 00 to the alternative system code of 4E7YLZZPUN[OYLL[PTLZHNHPUYL[\YUZ[OLZ`Z[LTJVKL[VKLMH\S[00
setting.
The system code of the matrix can also be changed between default 00 and 4E in the Web UI within Advanced Settings.
1. *SPJRAdvanced Setting.
2. *SPJREnter in the IR Setting section