Need help?Do you have a question about the Wyze WyzeCam and is the answer not in the manual?
General| Frame Rate | Up to 15 fps |
|---|---|
| Sound Detection | Yes |
| Resolution | 1080p Full HD |
| Field of View | 110° |
| Connectivity | 2.4 GHz Wi-Fi |
| Power | 5V 1A MicroUSB |
| Microphone | Built-in microphone |
| Motion Detection | Yes |
| Storage | MicroSD card (up to 32GB) |
| Weight | 3.5 oz (100 g) |
| Night Vision | Yes, 8 IR LEDs with up to 30ft range |
| Audio | Built-in speaker and microphone |
| Operating Temperature | -10°C to 40°C (14°F to 104°F) |
Download the Wyze app and create an account to start the setup process for your device.
Connect the camera to a power outlet and wait for the yellow status light to flash, indicating readiness.
Press the SETUP button for 3 seconds until a voice prompt is heard to enter setup mode.
Follow the instructions presented in the Wyze app to finish the setup and configuration.
Solid yellow indicates the device is powered on and initializing; flashing yellow means it's ready to connect.
Flashing yellow & blue lights show connection progress; flashing blue indicates connection and setup completion; solid blue means the device is working.
Access tutorial videos, troubleshooting FAQs, community forums, and contact information for assistance.
To Next Page
