Support
Should you encounter difficulty with the installation or programming, please
consult the Help Files in MW3.1, or ControllerMate. We also recommend
checking the FAQ page on our website before contacting our technical support
specialists.
USA: tech@xkeys.com | Phone: 1-517-655-5523
UK: xkeys@keyboardspecialists.co.uk | Tel +44 (0)20 3474 0234
Compatibility
The X-keys XKE-40 can be programmed to emulate a USB keyboard, mouse,
game controller, or multimedia controller. These features are available in
MacroWorks 3.1 for Windows.
Hardware Mode Programming
We also offer MacroWorks Hardware, a Windows application for programming
the X-keys exclusively in Hardware Mode. Programming is stored in X-keys
on-board memory and the X-keys will send USB messages to any computer or
tablet (no software or driver installation required).
KVM Version
We also offer a KVM version of the X-keys optimized for use with USB KVMs.
The simplified robust feature set allows for programming of keystrokes, delays,
and keystroke macros.
Identifying the Keys
Select appropriate icons from the pre-printed sheet or use the blank legend
sheet to create your own key legends. The keycaps snap off with a fingernail
or small screwdriver. Apply the label under the keycap, and replace it. The
key caps hold a legend 0.575" wide and 0.5" high (14.6mm x 12.7mm). Other
options are available for printing legends for multiple units. See more
information on our website.
Backlighting
All keys on the XKE-40 have two backlighting colors (red and blue) behind
them. Backlighting intensity can be set and keys can be programmed to
manipulate the backlighting. See more information in the Help File.
Compatible Accessories
Please visit the Accessories page on our website for details on the following.
Tall, wide, and quad keycaps and key blockers
Custom printed keycaps for 10 or more units
X-keys USB Extender – up to 150 feet via CAT 5 cable
To Next Page
Loading...
Need help?
General