X-media XM-SW1008D - Switch LED Indicators; Power LED Status; Ethernet LED Status; Network Diagram

10/100Mbps Switch
P a g e | 3
The Switch LEDs are located on the front panel:
LED
Status
Indication
Power
On
The Switch is Powered On
Off
No power source
*Please check if the power cord is connected to Switch
properly, and make sure the Power is On.
Ethernet LED
On
The corresponding Ethernet port is connected to a
network device.
Flashing
Data is being transmitted and received.
Off
No device is connected to corresponding port.
*Please check if the cable connector is firmly plugged
into the Switch and device, and verify the connected
device is turned on and working well.
Network Diagram