OPERATING INSTRUCTIONS
Handle Assembly
1. Loosen the Knob Handle on each side of the
Upper Handle.
2. Swing the Upper Handle until it points straight
out from the Lower Handle.
3. Tighten both Knob Handles securely. (FIG-2)
Starting the Engine
1. Turn the STOP SWITCH clock-wise to the position "I"(ON)．(FIG-3)
2. Open the fuel cock. (FIG-4)
3. Set the speed control lever 1/3 to 1/2 of the way towards the high speed position. (FIG-5)
To Next Page
Loading...