X-TREME XT2000 - Features Overview; Integrated System & Protections; Performance Specifications; Connectivity and Control Features

stereo DSP power amplifier
amplifiers
FEATURE
• Integrated system;
• Electronic protections: short circuit/overload protection, overheating protection and direct current excursion protection;
• Network control;
• Power supply: RMS 2 x 1700W (4Ω) RMS 2 x 1000W (8Ω) XT3400
RMS 2 x 1300W (4Ω), RMS 2 x 850W (8Ω) XT2600
RMS 2 x 1000W (4Ω), RMS 2 x 650W (8Ω) XT2000
• Built-in 48-bit DSP processor and dynamic range up to 116dB, 48kHz sampling rate A/D, D/A;
• Low noise and lower distortion;
• Well-designed signal generator: sin wave and white noise;
• S/PDIF input/output (option);
• Matrix control, up to 255 units controlled by selecting address code;
• Save and recall all parameters via PC parallel port 3 band PEQ, limiter (threshold, attack time and release time adjusted),
delay (max 8ms), phase invert, input gain control;
• Two crossover: range, 20Hz-20kHz.
Crossover frequency adjusted. Slope: -6, - 12, -18, -24 and -48 dB butterworth or Linkwitz-Riley;
• 20 user memories available;
• THD+N: 0.08%@1kHz;
• Frequency response: 20Hz-20kHz;
• 2 x 20 LCD display with backlit.
X-TREME
2
X-TREME
via Monti Urali, 31 - 42029 Reggio Emilia (Italy) • ph. +39 - 0522 - 557735 • fax +39 - 0522 - 393733 • e-mail: info@x-tremeaudio.com