Need help?Do you have a question about the X10 PHC01 and is the answer not in the manual?
General| Device Type | Controller |
|---|---|
| Brand | X10 |
| Model | PHC01 |
| Protocol | X10 |
| Compatibility | X10 devices |
| Power Supply | 120VAC, 60Hz |
| Connectivity | Powerline |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 60°C |
| Humidity | 85% non-condensing |
Explains how the Mini Controller sends command signals over existing house wiring to control various X-10 Modules.
Details the initial setup steps, including plugging in the power cord and setting the Housecode dial for control.
Instructions for installing and setting up X-10 Modules, ensuring they match the Mini Controller's Housecode.
Guides on turning devices ON/OFF, dimming/brightening lights, and activating all connected lights.
Instructions for using the All Units Off key to turn off all controlled modules, including appliance modules.
Provides solutions for modules not responding, including checks for power, unit codes, and housecodes.
Discusses potential interference from intercom systems and module behavior after power restoration.
Explains how to manually control plug-in modules and wall switch modules directly.
To Next Page
