08905153A - 23 -
D5IP Source Input Wall Plate
A D5IP Source Input Wall Plate is required to add a Local Source to a zone. The wall plate has audio
and IR connections similar to the SOURCE INPUT of the D5RH. A run of CAT-5 terminated to T-
568A standard (see Figure 2.2) is required between the D5KP Amplified Keypad and the location
designated for the D5IP. Connections between a source component and the D5IP are detailed in
Figure 3.10 to Figure 3.12, while connections between the D5IP and the D5KP Amplified Keypad are
detailed in Figure 3.15. NOTE: Set RCA/OPT/COAX switch to RCA (up) position.
To Next Page
Loading...