08905153A - 27 -
Connections between a D5RH chassis and D5XH Digital Audio Distribution Hub involve CAT-5 patch
cables routed between the units. All cables are included with the D5XH. Connections are required for:
• EXPANSION OUT/EXPANSION IN
• SOURCE LOOP OUT/SOURCE LOOP IN
EXPANSION OUT/EXPANSION IN
Simply connect a CAT-5 patch cable from the D5RH’s EXPANSION OUT port to the first D5XH’s
EXPANSION IN port. For multiple D5XH units, connect a CAT-5 patch cable from the first D5XH’s
EXPANSION OUT port to the next D5XH’s EXPANSION IN port, and so on. See Figure 3.15 for
details.
SOURCE LOOP OUT/SOURCE LOOP IN
Connect a CAT-5 patch cable from each SOURCE LOOP OUT of the D5RH to each corresponding
SOURCE LOOP IN on the first D5XH. For multiple D5XH units, connect a CAT-5 patch cable from
each SOURCE LOOP OUT of the first D5XH to each corresponding SOURCE LOOP IN on the next
D5XH and so on. See Figure 3.15 for details.
Cat-5
Cat-5
To Additional D5XH Chassis
D5RH
D5XH
D5XH
Figure 3.15: System Expansion Connections
To Next Page
Loading...