- 2 -
ADJUSTMENTS
Each sensor module has an adjustment for delay (between 0 and 15 seconds). The delay adjustment
determines the amount of time the sensor module remains “on” after the stimulus condition stops. For
instance, when SMVLT01 no longer sees a voltage that stimulated the sensor to the “on” condition,
the delay will determine when the sensor returns to the “off” condition.
Increase Decrease
Delay
Clockwise Counter-Clockwise
Sensitivity
Clockwise Counter-Clockwise
The sensitivity adjustment is found on all sensor modules except the SMCC01 and SMVLT01.
Increasing the sensitivity will make the sensor easier to ‘trip’. Decreasing the sensitivity makes the
sensor harder to ‘trip’.
To Next Page
Loading...