Feature Description
1 Captive nut panel screw holds
the AC compartment
cover in place.
2 Ventilation grille (op
enings) must not be obstructed.
3 Grounding stud with attached nut p
rovides a ground
path for the Freedom X chassis to the DC system
ground.
4 DC output
opening for routing (–) negative DC cable.
5 DC output
opening for routing (+) positive DC cable.
6 LED indicator for
reverse DC polarity.
7 Remote port allows you to connect an accessory
remote control device.
8 ACC input terminal fo
r connecting ignition control
wiring. Ignition Control Switch (ACC) for
connecting [ON (|)] and disconnecting [OFF (O)] the
ignition signal.
9 AC output knockout can be rem
oved for routing AC
output wiring.
10 AC input knockout can
be removed for routing AC
input wiring.
11
Mounting flanges on both sides allow you to mount the
inverter permanently on deck or on a wall.
Feature Description
Freedom X Series INV Owners Guide.book Page 4 Tuesday, June 27, 2017 4:10 PM
To Next Page
Loading...
