Front Panel Display Screens and What They Mean
975-0466-01-01 5–7
Offline Mode
Offline default
display
At night and when no power is being produced by the PV array (offline mode), the
GT Inverter displays the screen shown in Table 5-5.
Offline messages
for all systems
Additional message screens can be viewed when the system is offline by tapping
the front panel. Each additional tap displays the next screen, in the order shown in
Table 5-6.
These message screens are common to all GT Inverter systems, no matter how
many units are installed. If you continue to tap the unit, then the LCD will
continue to cycle through all of the available offline mode screens.
Table 5-4
Additional Normal Operation Screens for Each GT Inverter in a
Multiple Unit System
Tap Display Description
7th Unit 1500W
Today 1.250kWh
Power being produced by this unit now.
Cumulative energy produced by this unit today.
8th Unit Lifetime
150kWh
Lifetime energy produced by this GT Inverter unit
Table 5-5
Offline Mode Default Display
Display Description
Inverter
Offline
Displayed at all times while the system is offline.
Table 5-6
Offline Mode Screens for All GT Inverters
Tap Display*
* In a multiple unit system with network cables installed, the system values
displayed are for the entire system. Time online is for the local inverter.
Description
1st Inverter
Offline
LCD back light turns on for better readability and
default Offline Mode screen is displayed.
2nd System 0W
Today 2.50kWh
Power being produced by the system now.
Cumulative energy produced by the system today.
3rd System Lifetime
305kWh
Lifetime energy produced by the system.
4th Time Online
hh:mm:ss
Total time that the system was online today, in
hours (hh), minutes (mm) and seconds (ss).
To Next Page
Loading...
