Installation
2–10 975-0466-01-01
This chapter describes the first step: mounting the inverter and installing
accessories.
Mounting steps Instructions for mounting the GT Inverter are described in the following sections:
• “Installing the Mounting Bracket” on page 2–12
• “Mounting the Inverter on the Bracket” on page 2–16.
Tools and Materials Needed
• Assorted screwdrivers, drill, etc.
• Level
• Mounting support material, such as plywood or poles
• Wood screws, anchors for screws, depending on mounting surface.
Figure 2-3
Installation Overview
Grid Tie Solar
Inverter
000000
08
kWh
230 V 50 Hz10(60 )A
Utility Grid
Utility Meter
Main Utility
Service Panel
PV Array
600 Vdc
Open Circuit
Maximum
Xantrex GT Inverter
1
2
3
Line1
Line Neutral
Protective Earth
To Next Page
Loading...
