44
Options & Versions
User-installable OPTIONS available include:
Prescalers: Extend the voltage range covered by the Link 10
to either 0–100 V (Xantrex P/N 84-6000-0) or
0–500 V (Xantrex P/N 84-6000-05).
Temperature Sensor: Reports battery temperature in Degrees Celsius
(Xantrex P/N 84-2024-00)
All other options must be installed at the time the Link 10 is manufactured,
as additional circuitry is involved.
Special order VERSIONS of the Link 10
RS-232 (9600, 8, N, 1 ASCII computer port)
Alarm Switch Switch closure when Low Battery Alarm is active.
RS-232 + Alarm Switch (Both options above)
To Next Page
Loading...
