Why is there a buzz in my audio equipment when using a Xantrex Inverter?
If you are experiencing a buzz in your audio equipment when using a Xantrex Inverter, it's likely because the power supply in the audio system doesn't adequately filter the modified sine wave produced by the inverter. Using a sound system with a higher quality power supply should resolve this issue.
General safety guidelines for installing and using the inverter, including handling the unit and avoiding hazards.
Safety measures to prevent fire or explosion, especially concerning batteries and their gases.
Safety guidelines for handling batteries, including ventilation, avoiding sparks, and removing metal items.
Essential safety precautions to follow before and during the installation process of the PROwatt 3000.
A summary of the seven main steps involved in installing the PROwatt 3000 inverter.
Guidance on planning the power system, including battery requirements and charging system selection.
Criteria for selecting an appropriate and safe location for mounting the PROwatt 3000 inverter.
Procedures and precautions for hardwiring the inverter into an existing AC electrical system.
Addresses common issues like audio buzz and television reception interference with troubleshooting tips.
A comprehensive table listing problems, possible causes, and solutions for the PROwatt 3000 inverter.
To Next Page
General