About This Manual
x Operating Manual for XDC Series Power Supply
Appendix B: SCPI Command Reference describes the Standard Commands
for Programmable Instruments (SCPI) commands supported by this model.
Appendix C: Error Messages describes the error messages that could appear
during operation.
Appendix D: GPIB describes the General Purpose Interface Bus (GPIB)
commands and lines supported by this model.
Appendix E: Specifications and Characteristics provides electrical and
mechanical specifications.
Revisions
The current release of this manual is listed below. Updates may be issued as an
addendum.
Release 3.0 (2002-06)
To Next Page
Loading...
