Xantrex XDC - SCPI Status Commands Reference (Continued); More SCPI Commands for Status Registers

206 Operating Manual for XDC Series Power Supply
SCPI Command Reference SCPI Command Summary
Set Operation Status
Remote Control Negative
Transition Register
[:]STATus[<channel>]:OPERation:RCONtrol:NTRansition
<status-enable>
See Table 4.13, on page 148. Yes
Set Operation Status
Remote Control Positive
Transition Register
[:]STATus[<channel>]:OPERation:RCONtrol:PTRansition
<status-enable>
See Table 4.13, on page 148. Yes
Query Operation Status
Regulating Condition
Register
[:]STATus[<channel>]:OPERation:REGulating:CONDition?
See Table 4.10, on page 146. N/A
Set Operation Status
Regulating Enable
Register
[:]STATus[<channel>]:OPERation:REGulating:ENABle
<status-enable>
See Table 4.10, on page 146. Yes
Query Operation Status
Regulating Event Register
[:]STATus[<channel>]:OPERation:REGulating[:EVENt]?
See Table 4.10, on page 146. N/A
Set Operation Status
Regulating Negative
Transition Register
[:]STATus[<channel>]:OPERation:REGulating:NTRansition
<status-enable>
See Table 4.10, on page 146. Yes
Set Operation Status
Regulating Positive
Transition Register
[:]STATus[<channel>]:OPERation:REGulating:PTRansition
<status-enable>
See Table 4.10, on page 146. Yes
Query Operation Status
Shutdown Condition
Register
[:]STATus[<channel>]:OPERation:SHUTdown:CONDition?
See Table 4.11, on page 146. N/A
Set Operation Status
Shutdown Enable
Register
[:]STATus[<channel>]:OPERation:SHUTdown:ENABle
<status-enable>
See Table 4.11, on page 146. Yes
Query Operation Status
Shutdown Event Register
[:]STATus[<channel>]:OPERation:SHUTdown[:EVENt]?
See Table 4.11, on page 146. N/A
Set Operation Status
Shutdown Negative
Transition Register
[:]STATus[<channel>]:OPERation:SHUTdown:NTRansition
<status-enable>
See Table 4.11, on page 146. Yes
Set Operation Status
Shutdown Positive
Transition Register
[:]STATus[<channel>]:OPERation:SHUTdown:PTRansition
<status-enable>
See Table 4.11, on page 146. Yes
Query Operation Status
Shutdown Protection
Condition Register
[:]STATus[<channel>]:OPERation:SHUTdown:PROTection:CO
NDition?
See Table 4.11, on page 146. N/A
Set Operation Status
Shutdown Protection
Enable Register
[:]STATus[<channel>]:OPERation:SHUTdown:PROTection:EN
ABle <status-enable>
See Table 4.11, on page 146. Yes
Query Operation Status
Shutdown Protection
Event Register
[:]STATus[<channel>]:OPERation:SHUTdown:PROTection[:E
VENt]?
See Table 4.11, on page 146. N/A