975-0555-01-01 2–3
4 Reset button
Use to reset the 20 A supplementary (overcurrent) protectors.
5 Power light (green)
Indicates the inverter is operating.
6 Remote O
N/OFF Connector Port
For connecting the Remote O
N/OFF Switch.
7 Fault light (red)
Indicates that the inverter has shut down due to inverter overload or
over-temperature.
8O
N/OFF Switch
Turns the inverter’s control circuit on and off. This switch is not a
power disconnect switch. Disconnect AC and DC power before
working on any circuits connected to the inverter.
Feature Description
To Next Page
Loading...
