Physical Features
975-0298-01-01 1–3
Physical Features
See Figure 1-1 and Figure 1-2 for the front and back features of the
System Control Panel.
Front Panel Features
Figure 1-1
Front Panel
Feature
1 Fault/Warning light indicates a device has a fault or warning condition and requires
attention. The light flashes when a warning occurs, and turns on steadily when a fault
occurs.
2 Enter button confirms selection of a menu item or displays the next screen.
3 Up arrow button scrolls upwards through screen text or increases a selected value.
4 Down arrow button scrolls downwards through screen text or decreases a selected value.
5 Exit button cancels selection of a menu item or displays the previous screen.
6 Screen shows menus, settings, and system information.
7 Standby button disables inverting and charging on all inverter/chargers in the system
when pressed for one to two seconds. To enable inverting and charging, press the Standby
button again. See “Using the Standby Button” on page 4–3.
Fault/Warning
System Control Panel II
Standby
1
2345
7
6
To Next Page
Loading...
