Verifying the Installation
975-0298-01-01 2–15
Verifying the Installation
If network power (from an inverter/charger or external power supply) is
present, the backlight will come on and the System Control Panel will
show the startup screen (see page 3–3).
When the System Control Panel is started up on the Xanbus system for
the first time, it displays a fault message asking you to set the clock before
proceeding. For procedures for setting the clock, see “Setting the Time”
on page 3–11 and “Setting the Date” on page 3–12.
To Next Page
Loading...
