Configuring the XW System Control Panel
975-0298-01-01 3–7
3. Press the up arrow or the down arrow button to change the value.
Hold down the button to scroll through a large range of values
quickly.
4. Press Enter to select the value or Exit to cancel the value selection.
5. If you have another setting to change, return to step 1.
Or
If you have no more settings to change, press Exit twice to return to
the System Home screen.
Configuring the XW System Control Panel
You can configure the System Control Panel to suit your preferences and
the requirements of the Xanbus system. Some settings, such as the system
time, affect the entire system. Other settings affect only the System
Control Panel, such as the brightness of the display.
You can perform all these tasks on the SCP Setup menu, the Clock menu,
and the System Settings menu.
Configuring the System Control Panel is done on the SCP Setup menu,
which you can view in either basic or advanced formats.
To view the SCP Setup menu:
1. From the System Status screen, press Enter to view the Select Device
menu.
2. On the Select Device menu, highlight SCP and press Enter.
Select Device
To Next Page
Loading...
