Configuration
3–8 975-0298-01-01
System Control Panel Configuration Items
The SCP Setup menu contains settings for changing the appearance of the
display, enabling button-press and alarm sounds, and setting the
temperature scale. Items in gray appear only on the advanced menu.
Menu item Description Values/Action Default
Brightness Adjusts the brightness of the display to suit
interior light conditions and enhance visibility.
20% to 100%
(increments of 10%)
60%
Contrast Adjusts the contrast of the display to suit
viewing angle and enhance visibility.
0% to 100%
(increments of 5%)
60%
Light Timer Sets how long the backlight remains on after
the last button press on the System Control
Panel.
Off, 1mins–60mins
(increments of 1
minute)
2mins
Button Beep Enables buttons to beep when pressed. On, Off Off
Fault Alarm Enables an alarm to sound when a fault occurs. On, Off Off
LoBatt Alarm Enables an alarm to sound when a low battery
voltage condition exists.
On, Off Off
Set Degrees Selects the temperature scale the System
Control Panel will display.
Fahrenheit, Celsius Fahrenheit
Name Allows you to customize the name of the
System Control Panel as it is displayed on the
setup menu and the Select Device menu.
Press Enter to begin
customizing the
name. See “Setting
the Device Name” on
page 3–9.
SCP
Clear Faults/
Warnings
Clears active faults and warnings generated by
the System Control Panel.
Press Enter to clear
faults and warnings.
n/a
View Fault
Log
Displays the Fault Log, containing the last 20
System Control Panel faults.
Press Enter to view
log.
n/a
View Warning
Log
Displays the Warning Log, containing the last
20 System Control Panel warnings.
Press Enter to view
log.
n/a
View Event
Log
Displays the Event Log, containing the last 20
System Control Panel events.
Press Enter to view
log.
n/a
Restore
Defaults
Restores the System Control Panel to its
original factory or installer settings. After
restoring defaults, please ensure the clock is set
correctly.
Press Enter to restore
defaults.
n/a
To Next Page
Loading...
