iii
About This Guide
Purpose
The purpose of this Owner’s Guide is to provide explanations and
procedures for installing and operating the XW System Control Panel.
Scope
The Guide provides safety guidelines, setup information, and procedures
for installing and configuring the XW System Control Panel. This Guide
also includes information about operating and troubleshooting the unit.
This Guide does not contain guidelines for configuring every Xanbus-
enabled device to which the System Control Panel connects. See the
owner’s guide or operation guide for each Xanbus-enabled device for
detailed configuration information.
Firmware Revision
Some System Control Panel features and functions described in this
manual may be incompatible with later firmware revisions. To view the
firmware revision number of your product, see “Viewing Device
Information” on page 3–14.
Audience
The Guide is intended for anyone who needs to install and/or operate the
System Control Panel. Installers should be certified technicians or
electricians.
Organization
This Guide is organized into five chapters and one appendix.
Chapter 1, “Introduction”, introduces and describes features of the
Xantrex System Control Panel.
Chapter 2, “Installation”, contains information and procedures for
installing the System Control Panel.
To Next Page
Loading...
