Operation
4–6 975-0298-01-01
To view the warning log:
1. On the SCP menu, press the down arrow button to highlight View
Warning Log.
2. Press Enter.
To return to the SCP menu:
u From the Warning log, press Exit.
Viewing Individual Warning Messages from the Warning Log
On the warning log, you can also select an individual warning and view
its details.
To view details for a warning:
1. Use the up arrow or down arrow button to highlight the warning
message you want to view.
2. Press Enter.
The complete message appears.
To return to the warning log:
u Press Exit (as indicated by the arrow marked “cancel”).
To proceed to the device menu and adjust device settings to eliminate
the warning condition:
u Press Enter (as indicated by the arrow marked “continue”).
Fault Messages
Fault messages appear when the System Control Panel’s operation is
affected by a condition that requires immediate attention. When a fault
occurs, the System Control Panel stops operating until either the fault
condition goes away or until you manually clear the fault and take action
to eliminate the fault condition.
Figure 4-2
System Control Panel warning log
Warning Log:SCP
To Next Page
Loading...
