Water level indicator
The Button*
Status indicator
Power cord
The Button
From bluetooth pairing to pausing the brewing process, the Button on the back
of your xBloom machine will enable you to carry out a number of actions
depending on when and how you use it.
1 short press will pause the grinding or water pouring process. Press the Button
again when you’re ready to resume grinding or pouring water.
3 short presses within 2 seconds will stop xBloom, which will return to standby
mode, ready to start brewing.
Pressing the button for 3 seconds will put xBloom in bluetooth pairing mode.
Search for xBloom on your device, connect, and get brewing with the app.
Pressing the button for 10 seconds or longer will drain the water from the
machine as long as you keep the Button pressed.
To Next Page
Loading...