DHS-1
Assembly of your XDrum drum stool:
(Fig.1)
Unfold the tripod for a stable stand. (Fig. 1)
(Fig. 2)
The height adjustability of your stool is regulated with the middle threaded rod.
Screw it into the tripod at the desired height and fix the threaded rod using the
central wing screw. The small wheel above the wing screw helps you to fix the
threaded rod additionally. (Fig.2)
The seat position of your drum stool is now continuously height-adjustable from
47cm to 60cm.
Finally, you can attach the seat surface to the threaded rod and fix it in place using
the upper wing screw.
To Next Page
Loading...