SuperPro
®
6100 Programmer
www.xeltek.com 2 / 64
1296 Kifer Rd. Suite #605 sales@xeltek.com
Sunnyvale, CA 94086 Tel: +1 408-530-8080
Fax: +1 408530-0096
Important Information:
1. This manual applies to SuperPro 6100, SuperPro 611S, SuperPro 610P.
2. In order to connect the programmer easily and quickly, please connect the
hardware after installing the software.
3. Please read this manual carefully before using programmers.
4. Do not use self-made adapters. It is recommended to buy the adapter made by
Xeltek.
Copyright Notice
Software Copyright 2012-2022 XELTEK
User's Guide Copyright 2012-2022 XELTEK
The distribution and sales of the product are intended for use by the original
purchaser under the terms of the License Agreement.
This document may not, in whole or part, be copied, photocopied, reproduced,
translated or reduced to any electronic medium of machine-readable form without
prior consent in writing from XELTEK.
The information in this document is subject to change without notice.
In the event of any discrepancy in respect of meaning between the software and the
manual due to the upgrade of the software version, the software shall prevail.
SuperPro
®
is the registered trademark of XELTEK.
To Next Page
Loading...
