Pull the high chin straps upwards so
that the chin cup sits comfortably
under your chin. Repeat Step 2 on the
high straps, snapping them into place
once the helmet is secure and
ts comfortably – again making sure
there’s no slack in the straps.
ADJUST THE HIGH
BUCKLES & SECURE
3
With all four buckles snapped into
place, apply mild force to the
facemask in multiple directions.
If there is excessive movement,
tighten the chin straps and
readjust the buckles until you’ve
achieved a snug, secure t.
CHECK FOR
PROPER FIT
4
To Next Page
Loading...
