Xerox 8830 - Page 326

MEDIA DRIVE (1 OF 2)
DRIVER PWB (A2)
PL 1.1
MEDIA DRIVE MOTOR
DRIVE MOTOR PWB
(A7)
PL 7.2
DRAWER 1
REED SWITCH
(S1)
CAUTION
TO PREVENT DAMAGE TO THE
COMPONENTS. PLACE THE MAIN
POWER SWITCH TO THE OFF (0)
POSITION BEFORE DISCONNECTING
THE PLUGS.
DRAWER 2
REED SWITCH
(S2)
MEDIA DRIVE DIAGNOSTIC CODES
MEDIA DRIVE MOTOR (CCW) (INPUT)
MEDIA DRIVE MOTOR (CW) (INPUT)
ROLL 1 DRAWER SENSOR (INPUT):
ROLL 2 DRAWER SENSOR (INPUT)
ROLL 3 DRAWER SENSOR (INPUT)
DRAWER 3
REED SWITCH
(S3)
ROLL 1 CONTROL (OUTPUT): ENERGIZES THE MEDIA DRIVE MOTOR (MOT1)
AND CONTROLS FEED AND REWIND CLUTCHES.
Chain 7 Paper Supplying
1/98
7-42 8830
(MOT1)
PL 7.2