Xerox Phaser 6120 Reference Guide

Configuring the Printer170
SNMP
The Network/SNMP window provides the following parameters for
configuration:
Item Description
Enable SNMP If selected, enables the parameter settings for
SNMP.
Default: [Checked]
SNMP
GET
Community Sets the IP community of the printer.
Range: Up to 32 characters
Default: public
Access Identifies Read or Write access.
SNMP
SET
Community Sets the IP community of the printer.
Range: Up to 32 characters
Default: private
Access Identifies Read or Write access.
Save Changes Saves and applies any changes made.
Discard Changes If you made changes to any of the parameter
settings but do not wish to apply the changes,
selecting this button restores the last submitted
parameter settings.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm