April 2017
2-241
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
018-408, 018-409, 412, 413
Status Indicator RAPs
Launch Issue
018-408 Duplicate IPv4 Address RAP
018-408 The same IP address machine as the IPv4 address of this machine exists on the net-
work in the network environment where the Ether 2 side is connected.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Change the IPv4 address of this machine or the IPv4 address of the network upper
apparatus.
b. For manual address setting, ensure that the IP address specified by the client is not
used in other places.
c. Check the respective server setting environments with the client.
2. If the fault persists, perform the 016A Workflow Scanning Error Entry RAP.
018-409, 412, 413 Duplicate IPv6 Address 1 RAP
018-409 The same IP address machine as the IPv6 of this machine exists on the network in
the network environment where the Ether 2 is connected.
018-412 The same IP address machine as the state-less auto setting address 2 of this
machine exists on the network in the network environment where Ether 2 is connected.
018-413 The same IP address machine as the IPv6 state-less auto setting address 3 of this
machine exists on the network in the network environment where the Ether 2 is connected.
Procedure
Perform the steps that follow:
1. Advise the customer to:
a. Change the IPv6 address of the network upper apparatus that is duplicated to
resolve the IP address duplication.
b. Check if the IP address that was set in state-less address auto setting is not used in
other places.
2. If the fault persists, perform the 016A Workflow Scanning Error Entry RAP.
To Next Page
Loading...
Need help?
General
