Xerox VersaLink B7025 Service Manual

April 2017
2-430
Xerox® VersaLink® B7025/B7030/B7035 Multifunction Printer
033-560, 561, 562, 033-563, 033-569
Launch Issue
Status Indicator RAPs
033-560, 561, 562 TRESS/RCC RAP
033-560 For TRESS and RCC, the authentication ID that was sent from the remote terminal
was invalid.
033-561 TRESS and RCC cannot be performed as the operation is prohibited or a Job is in
progress.
033-562 RCC execution was put on hold as it is in the operation prohibited mode.
Procedure
Perform the steps that follow:
1. For a single occurrence, take no action.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.
033-563, 033-569 No Printable Paper Size RAP
033-563 When formatting, registered paper that is not applicable to the document size to be
printed was loaded.
033-569 The paper tray status is such that paper with orientation that can be output can only
be supplied from the SMH.
Procedure
Perform the steps that follow:
1. Advise the customer to specify the correct paper size and check that the paper trays are
correctly loaded with the paper guides correctly adjusted.
2. If the fault persists, perform the 033-312, 033-313, 033-315 to 033-327 Fax Fault RAP.

Xerox VersaLink B7025 Specifications

General

Print Speed	Up to 25 ppm
Print Resolution	Up to 1200 x 1200 dpi
Copy Resolution	Up to 600 x 600 dpi
Scan Resolution	Up to 600 x 600 dpi
Control Panel	5-inch color touchscreen
Duplex Printing	Standard
Processor	1.05 GHz
Memory	2 GB
Paper Output	250 sheets
Fax Speed	33.6 kbps
Fax Transmission Speed	3 seconds per page
Display	5-inch color touchscreen
Connectivity	Ethernet 10/100/1000 Base-T, High-speed USB 3.0
Functions	Print, Copy, Scan
Media Sizes Supported	A4, A5, A6, B5
Printer Type	Laser
Copy Speed	Up to 25 ppm
Mobile Printing	Apple AirPrint, Google Cloud Print, Xerox Print Service Plug-in for Android