Identifying the HCS Components
The HCS consists of the following components:
1. Control Panel: Provides manual control of the various HCS functions.
2. Top Tray: Holds a maximum of 500 sheets (13 x 19.2 in. / 330 x 488 mm).
Note
Labels must be delivered to the Top Tray.
3. Bypass: Used only when a second stacking/finishing device is installed. This path
transports media through the HCS to another connected finishing device.
4. Stacker Tray / Cart: Collated sets (up to a total of 5000 sheets) are transported to
the Stacker Tray, which is located on a movable Stacker Cart.
Note
The Stacker Tray / Cart capacity may be less than 5000 sheets if the media being
used is heavyweight or thicker sheets.
Xerox
®
Versant
®
2100 Press15-2
User Guide
High Capacity Stacker (HCS)
To Next Page
Loading...
